What Should You Consider Before Ordering Made-to-Measure Glass Partitions?
Ordering a glass partition is not like buying an off-the-shelf product. Toughened glass is manufactured to its final dimensions before the toughening process, so every decision you make at the order stage is effectively permanent. Once the glass has been toughened, it cannot normally be cut, drilled or reshaped.
This guide walks through the key considerations in a logical order: choosing the right glass type, understanding thickness, measuring accurately, specifying edges and fittings, and planning the practical side of delivery and quotes. By the end, you will know what to decide, what to check and when to ask for professional advice before you place an order for made-to-measure glass partitions.
Which glass type suits your partition?
The glass type determines how your partition looks, how it behaves if broken and how much privacy it offers. For most UK partition projects, you will choose between toughened glass and toughened laminated glass, then select a tint or finish.
Toughened glass is heat-treated to increase its strength compared with ordinary annealed glass. If it breaks, it fractures into small, relatively blunt pieces rather than large sharp shards. It is the standard choice for most toughened glass partition panels in homes and offices. Toughened laminated glass bonds glass layers with an interlayer, so the panel tends to hold together if damaged, which can suit locations where a broken panel is a greater concern.
Beyond construction, you can choose from several appearances:
- Clear: the standard option for maximum light and visibility.
- Extra-clear low-iron: reduces the green tint visible in standard clear glass, especially noticeable on polished edges and thicker panels.
- Frosted satin: obscures detail for privacy while still allowing light through.
- Grey or bronze tinted: adds warmth or a more contemporary tone and reduces see-through clarity.
For example, a home office partition where you want light but not visual distraction might suit frosted satin, while a reception area that should feel open usually suits clear or low-iron glass. If you want to understand how heat-strengthened safety glass is made and why it behaves differently, the toughened glass overview is a useful starting point.
How thick should partition glass be?
Partition glass thickness depends on the whole system, not on a single preferred number. Panel height and width, the type of fixings, how the glass is supported and where the partition is installed all influence what is suitable. No single thickness is correct for every partition.
Building on the glass types above, thickness options vary by construction. Express Toughening supplies partition panels in a range from 10 mm to 19 mm depending on the glass type selected. A taller, wider or unsupported panel will generally need a more robust specification than a small, well-supported one, but the exact requirement must be confirmed for your configuration rather than assumed.
A common misconception is that thicker is always safer or that you can simply pick a thickness you like the look of. In practice, thickness has to be matched to the glazing channels or fittings, because the hardware is designed around specific glass thicknesses. Choosing glass first and fittings second can leave you with parts that do not fit or a system that has not been checked as a whole.
If your partition forms part of a safety-critical area, or you are unsure about loading, height or fixing method, seek professional assessment before ordering. Thickness advice is general guidance until it has been verified against your specific installation.
Measuring your opening accurately before ordering
Accurate measurement is the single most important step, because toughened glass cannot be trimmed on site. A panel that is a few millimetres too large will not fit, and one that is too small will leave gaps that spoil the finish.
Start by measuring the width and height of the opening in several places, not just once. Walls are rarely perfectly straight and floors are rarely perfectly level, so record the narrowest width and the shortest height you find. Check the verticals with a spirit level to identify any lean.
Then account for the practical allowances:
- Installation clearance: glass needs a small gap to be positioned safely, which is later covered by seals or channels.
- Supporting structure: confirm the floor, ceiling or wall is solid and suitable for the chosen fixing method.
- Hardware depth: channels, brackets and seals take up space that must be reflected in the glass size.
- Finished surfaces: measure after flooring, plastering and tiling are complete, since these change the final opening dimensions.
For awkward or non-square openings, a physical template made from hardboard or MDF can help capture the true shape. Write your measurements down clearly, label which is width and which is height, and double-check them before ordering. Where dimensions or system requirements are uncertain, consult the supplier before committing. The glass guidelines offer further technical reference for preparing an order.
Choosing edges, holes, cut-outs and fittings
Every machining detail must be decided before the glass is toughened, so this stage deserves as much care as the measuring. It is also where the look and function of your partition are finalised.
Edge finishes
Exposed edges can be polished for a smooth, clean appearance. Because partition edges are often at eye level and hand height, a polished finish is a common choice for visible edges, while edges hidden inside channels may need less attention. Consider how each edge will be seen and touched in daily use.
Holes and cut-outs
If your design needs holes for door hardware, handles or bolted fixings, or cut-outs for other fittings, their positions must be specified precisely. Think through the exact hardware you plan to use, because hole sizes and spacing are tied to that hardware. Changing your mind after toughening is not an option.
Fittings and compatibility
Glazing channels, glass seals and compatible fittings hold the partition in place and deal with small movements and irregularities. The key principle is compatibility: the fittings must suit the glass thickness, panel weight and your supporting structure. If you are adding a decorative element, such as coloured or backed glass, check how finishes interact with adhesives and fixings; the painted glass information explains the options for coloured finishes.
Planning delivery, installation and quotes
Good planning at this stage prevents damage, delays and costly re-orders. Because panels are made to your exact specification, treat the order as a project with a sequence rather than a quick purchase.
Before requesting a quote, gather your key details so the figures are accurate:
- Final panel dimensions, clearly labelled.
- Glass type, tint or finish, and thickness.
- Edge finish required.
- Positions and sizes of any holes or cut-outs.
- The fittings, channels or seals you intend to use.
- Delivery location and access, including stairs, narrow doorways and parking.
Think about access before delivery day. Large glass panels are heavy and awkward, so check that routes into the building are clear and that you have enough people to handle them safely. Store panels upright and protected until installation, and avoid placing glass directly on hard surfaces, since impact to a toughened edge can cause breakage.
Installation requires a stable supporting structure and careful alignment, and for large panels or any safety-critical location, a competent glazier or installer is strongly advised. Remember that the performance of a partition depends on the complete system, so confirm that glass, fittings and fixing method work together. Finally, look for glass produced to recognised standards, such as products carrying the BSI Kitemark, and ask for supporting documentation if you need evidence for compliance purposes.
Explore Bespoke Glass Partition Options with Express Glass Warehouse
If you are ready to move from planning to ordering, Express Glass Warehouse can supply bespoke toughened glass to your specified sizes and details. Supply is for the glass itself; installation is a separate matter to arrange with a suitable professional.
- Choose from clear, extra-clear low-iron, frosted satin, grey tinted, bronze tinted and clear toughened laminate options.
- Specify thickness, edge finish, holes and cut-outs to suit your chosen fittings.
- Talk through your measurements and system requirements before you order if anything is uncertain.
To discuss your requirements or request a quote, please contact the team and share your dimensions and intended use.
Related Articles
- How Do You Plan Glass Partition Layouts for an Open-Plan Office?
- What are the most popular glass design trends for 2026?
- How do glass doors compare to solid doors for interior spaces?
- What is the difference between a glass balustrade and a railing?
- What are the benefits of glass extensions for homeowners?




