Need help? Give us a call on 020 8500 1188

Home / Shop / Balustrades for Stairs

Balustrades for Stairs

Product Description

Stair balustrades are essential safety features to prevent people from accidentally tripping and falling between different floor levels.

However, they’re also key decorative features, so they should be both aesthetically pleasing and durable – like toughened glass panels.

Here at Express Toughening, you can order bespoke glass balustrades for stairs from a selection of glass finishes and thicknesses, cut to size according to your specific measurements.

Use the order form below to fill out your specifications, including any extras you might require, and we’ll generate a quote for your custom glass stair balustrades.*

Depending on the product requirements and your location, your staircase glass balustrades should be delivered within 10–25 working days of our team processing your order.

GLASS BALUSTRADES FOR STAIRS

If you’re looking for a sophisticated stair balustrade design that doesn’t completely close off your staircase, keeping sightlines open and allowing light to flow through the area, then our toughened glass balustrades for stairs could be just the solution.

Your internal or external staircase area will not only look modern and elegant with glass stair panels, but it will also feel brighter and more open thanks to the increased amount of light passing through the clear or translucent glass.

Our options include standard clear glass, low-iron glass, satin frosted glass, or grey or bronze tinted glass to suit your preferences for clarity and privacy.

If you would prefer a sleek frameless look, we offer toughened laminated glass, too – this type of thick safety glass is required for balustrades without posts or handrails. If you want to extend this stylish look to the actual steps, you can also order laminated walk-on glass for stairs.

You can have full confidence in the durability of our balustrades for stairs, which are suitable for installation both indoors and outdoors – along with our selection of glass balustrade fittings. These include channels, clamps, corners, end caps, posts, handrails, gate latches, soft-close hinges, and more.

If you have any questions about our balustrades for stairs and fixings or need assistance with making a bespoke order, get in touch with our team for help.

£76.80£282.00

  • Express Delivery available on this product.
  • This product is manufactured in the UK.
  • Toughened Glass.
  • Polished edges included.

Disclaimer: It is the responsibility of the customer to investigate if planning permissions are required, ensuring all projects are completed to British Standards BS 6399-1:1996 and BS 6180:2011 – expresstoughening.com are not responsible for any building regulation requirements, this shall be up to the client to ensure safety precautions have been met accordingly.

Please Select The Style Below

Clear Toughened Glass
Toughened Low Iron Glass (extra clear)
Clear Toughened Laminate Glass
Toughened Frosted Satin Glass
Toughened Grey Tinted Glass
Toughened Bronze Tinted Glass

Please Select The Shape Below

Parallelogram
Rectangle
Left Hand Rake
Right Hand Rake

Please fill in the dimensions below

(Please note to allow a 2mm tolerance in all designs.
All internal notches will have a 7mm radius to ensure structural integrity during the toughening process.)

Rectangle

  • Width (A) *

    Min: 250Max: 3000

  • Height (B) *

    Min: 100Max: 1500

  • Dimensions *

Left Hand Rake

  • A *

    Min: 100Max: 1500

  • B *

    Min: 250Max: 3000

  • C *

    Min: 10Max: 1499

  • Dimensions *

Right Hand Rake

  • A *

    Min: 10Max: 1499

  • B *

    Min: 250Max: 3000

  • C *

    Min: 100Max: 1500

  • Dimensions *

Double Rake Irregular

  • A *

    Min: 250Max: 3000

  • B *

    Min: 100Max: 1500

  • C *

    Min: 10Max: 1499

  • D *

    Min: 10Max: 2999

  • Dimensions *

Reverse

  • A *

    Min: 250Max: 3000

  • B *

    Min: 10Max: 1500

  • C *

    Min: 100Max: 1999

  • D *

    Min: 10Max: 2999

  • E *

    Min: 10Max: 2999

  • Dimensions *

Left Hand L Shape

  • Left Hand L Shape

    A *

    Min: 250Max: 3000

  • B *

    Min: 10Max: 2999

  • C *

    Min: 100Max: 1500

  • D *

    Min: 10Max: 1999

  • Dimensions *

Right Hand L Shape

  • A *

    Min: 250Max: 3000

  • B *

    Min: 10Max: 2999

  • C *

    Min: 100Max: 1500

  • D *

    Min: 10Max: 1999

  • Dimensions *

Cut Off Corner Rectangle (Left)

  • A *

    Min: 100Max: 3000

  • B *

    Min: 250Max: 2999

  • C *

    Min: 10Max: 2999

  • D *

    Min: 10Max: 2999

  • Dimensions *

Cut Off Corner Rectangle (Right)

  • A *

    Min: 100Max: 3000

  • B *

    Min: 250Max: 2999

  • C *

    Min: 10Max: 2999

  • D *

    Min: 10Max: 2999

  • Dimensions *

Circle

  • Circle

    Diameter (A) *

    Min: 330Max: 1480

  • Dimensions *

Ellipse

  • Ellipse

    Diameter (A) *

    Min: 330Max: 3000

  • Height (C) *

    Min: 330Max: 1500

  • Dimensions *

Quadrant

  • A *

    Min: 250Max: 1500

  • Dimensions *

Parallelogram

  • A *

    Min: 250Max: 3000

  • B *

    Min: 250Max: 1500

  • C *

    Min: 250Max: 3000

  • D (degrees) *

    Max: 90

  • Dimensions *

Semicircle

  • A *

    Min: 250Max: 3000

  • Dimensions *

Semiellipse

  • A *

    Min: 360Max: 1500

  • B *

    Min: 360Max: 3000

  • Dimensions *

Triangle

  • Triangle Shape - A (length), B (Height)

    A *

    Min: 250Max: 3000

  • B *

    Min: 100Max: 1500

  • Dimensions *

Please select product extras if required

  • Cut Outs

    Quantity * £19.00

    Cut outs should not be smaller than the thickness of the glass, or closer to the edge than 2.5 times the thickness of the glass, or larger than 30% of overall glass size. A customer service representative will contact you regarding your exact requirements if needed. Please upload any drawings if possible. Please upload any drawings below if possible.

  • Notches

    Quantity * £19.00

    Any polished notch will have an internal radius of at least 14mm. Non polished notches will be approximately 7mm internal radius. A customer service representative will contact you regarding your exact requirements if needed. Please upload any drawings below if possible.

  • Quantity * £4.00

  • Drill Holes

    Drilled Hole Sizing *

    Any drilled holes must be the same size or greater than the thickness of your glass selected. (For example 10mm glass can only have a hole of 10mm in diameter or greater). Drilled holes must be within reasonable distance from edge of the glass or other holes / cut-outs to prevent breaking when toughened. A customer service representative will contact you regarding your exact requirements if needed. Please upload any drawings below if possible.

  • Quantity * £7.50

  • Radius Corners

    Radius Corner Size *

    A rounded corner with a polished finish. A customer service representative will contact you regarding your exact requirements if needed. Please upload any drawings below if possible.

  • Dubbed Corners

    Quantity * £2.00

    Sharpness of corner removed with grey finish. A customer service representative will contact you regarding your exact requirements if needed.

  • File Uploads *

    Please share all diagrams, drawings and specifications (maximum of 10 files allowed)Max file size: 8 MBPermitted file types: pdf

  • Polymer coating protects glass with a barrier that repels water, soil, stains, soap scum, rust and hard water mineral deposits.

  • Rectangle Polymer *

  • Semi Circle Polymer *

  • Parallelogram Polymer *

  • Quadrant Polymer *

  • Ellipse Polymer *

  • Circle Polymer *

  • Cut Off Corner Rectangle Right Polymer *

  • Cut Off Corner Rectangle Left Polymer *

  • Right Hand L Polymer *

  • Left Hand L Polymer *

  • Reverse Poylmer *

  • Double Rake Irregular Polymer *

  • Right Hand Rake Polymer *

  • Left Hand Rake Polymer *

  • Triangle Polymer *

  • Semi Ellipse Polymer *

  • *

Product total

Extras total

Grand total

Please Select The Thickness Below

For express 24/48 hour delivery, call 020-8500-1188

Please note
All bespoke glass pieces are subject to a minimum charge of £30 each, which will be adjusted at checkout if necessary.

Your Order Subtotal:

£76.80£282.00

INSTALLATION

Need help designing, templating, or installing your ideal glass balustrade system? Speak to one of our recommended partners listed below for direct assistance.

As reputable suppliers of high-quality glass balustrades in the UK, we only partner with reliable affiliates, who will work closely with you in person to measure and fit your balustrade system.

Simply enquire about their site survey, template, and installation services to receive a free no-obligation quote for fitting our glass balustrades for you.

The Splashback Co.
Splashbacks | Mirrors | Balustrades
T: 020 7965 7492
W: www.splashbacksco.com

JS Glass Ltd.
Shower Screens | Balustrades
M: 07540 156 877
W: www.jsglass.co.uk

If you would prefer to install your glass balustrades yourself, you can find a range of glass balustrade fittings for sale on our website, including:

Our glass clamps are available in square, rounded, and circular shapes, with either a polished or brushed satin finish – allowing you to customise the final look of your balustrade system.

Additional information

Style

Clear Toughened Glass, Toughened Low Iron Glass (extra clear), Clear Toughened Laminate Glass, Toughened Frosted Satin Glass, Toughened Grey Tinted Glass, Toughened Bronze Tinted Glass

Shape

Parallelogram, Rectangle, Left Hand Rake, Right Hand Rake

Thickness

4mm, 6mm, 8mm, 10mm, 10.8mm, 12mm, 12.8mm, 15mm, 16.8mm, 19mm, 20.8mm

Additions you may need

Explore the range of fittings you may need for your product.

  • Offset Circular Glass Balustrade Fitting

    £46.00
    Buy Now
  • Smooth AR Top Mount Balustrade 90 Degree Post

    Smooth AR Top Mount Balustrade 90 Degree Post (10 – 10.8mm Glass)

    £102.00
    Buy Now
Call Now
Get Connected with us through our Social Media Channels!