-
FlexFit Wedge Kit 1.0kN for 5000mm Glass Length
The FlexFit wedge kit system allows you to adjust the position of each glass panel, perfect for the secure alignment of glass balustrades. With just a simple sliding motion you can position the glass accurately, reducing the assembly time by around 30%. Adjustments can be made up to 34mm in relation to the vertical axis.
-
1,240mm Electro Polished Aluminium Glazing Channels
Please note that these required cutting and drilling to suit on site.
-
2,400mm Translucent Glass Compression Seal for 10mm Glass
2.4m length of glass compression seal for frameless doors. Sold in single units and to be utilised for interfaces between the bottom/vertical edge of the door glass and the associated surface.
-
1,240mm Brushed Nickel Aluminium Glazing Channels
Please note that these required cutting and drilling to suit on site.
-
2,400mm Translucent Glass Seals for 10mm Glass
2.4m length of glass to wall/floor seal for frameless doors. Sold in single units and to be utilised for interfaces between the bottom/vertical edge of the door glass and the associated surface.
-
2,400mm Electro Polished Aluminium Glazing Channels up to 12mm Glass
Please note that these required cutting and drilling to suit on site.
PLEASE ENQUIRE IF YOU NEED A LONGER LENGTH
-
Brushed Finish Glass to Wall Inline Aperture Fittings
Inline Glass to Wall Fixed Aperture Fitting, with concealed fixings, Product includes necessary Gaskets and Fixings. Fixing Screws provided as standard, however alternative fixings may be required subject to application and structural requirements.
-
ROUND BACK Polished D Shaped Glass Clamps for 8mm and 10mm glass
Stainless steel polished D shaped glass clamps, suitable for curved post/aperture interfacing. Clamps come complete with washers, clamping fixings and optional security pins. M10 interface fixing cap screws to be provided by others (see technical drawing).
-
Brushed D Shaped Glass to Glass Clamp for 10-12mm glass
Brushed D Shaped Glass to Glass Clamp
Stainless steel brushed D shaped glass to glass balustrade clamp. Complete with washers, can also be used with 12mm glass if needed.
-
Glass Balustrade 90 Degree Corner Profile TL-6020
The TL-6020 is a top mounted profile best suited for 0.74kN to 1.5kN, therefore ideal for external residential or commercial projects. Tested by the British Standards Institute to BS 6180:2011 with Kitemarkâ„¢ Certificate.
Product technical diagram can be downloaded here.
-
2,400mm Translucent Glass to Glass Magnetic Seals for 10mm Glass
2.4m length of glass to glass magnetic seals for frameless doors. old in single units and to be utilised for interfaces between the leading edge of the door glass and the adjacent fixed glass pane. Rigid fin restricts opening to one direction only.
-
2,400mm Translucent Glass to Glass Closure Seals for 10mm Glass
2.4m length of glass to glass closure seal for frameless doors. Sold in single units and to be utilised for interfaces between the leading edge of the door glass and the adjacent fixed glass pane. Rigid fin restricts opening to one direction only.
-
1,000mm Translucent Glass to Floor Seals for 8mm Glass
1m length of glass to floor movement seals for frameless doors. Sold in single units and to be utilised for interfaces between the bottom edge of the door glass and the associated floor detail.
-
Glass to Wall 90 degree Aperture Fitting Concealed Fixings
90 degree Glass to Wall Fixed Aperture Fitting, with Concealed Fixings, Product includes necessary Glazing Washers and Fixings.
-
Brushed Finish Glass to Glass 90 degree Corner Fitting
90 degree Glass to Glass Corner Fitting, Product includes necessary Glazing Washers and Fixings.
-
Brushed Finish Adjustable Glass to Wall 90 Degree Hinge
Wall Mounted, Glass Door Hinge. 90 Degree Opening in Both Directions, with Automatic Closing when open less than 25 degrees.
Product Includes necessary Allen Keys and Glazing Washers.
FlexFit Wedge Kit 1.0kN for 5000mm Glass Length
