Flat Brushed Satin Square Glass Clamp for 8mm & 10mm Glass
Product Description
Flat Brushed Satin Square Glass Clamp stainless steal, suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing screws to be provided by others (see technical drawing)
£10.00
Disclaimer: It is the responsibility of the customer to investigate if planning permissions are required, ensuring all projects are completed to British Standards BS 6399-1:1996 and BS 6180:2011 – expresstoughening.com are not responsible for any building regulation requirements, this shall be up to the client to ensure safety precautions have been met accordingly.
Glass/Door Specification
Suitable for 8mm or 10mm thick glass (Glass Reduction Required)
Material Specification
These Clamps are supplied in Grade 304 Brushed/Satin Stainless Steel
Environment Compatibility
Suitable for Indoor and Outdoor Use
Design Compatibility
Suitable for Partitions, Balustrade and General Frameless Glass Structures.
Description
Brushed Satin Flat Back Square Glass Clamps, suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and reinforced screws. M8 interface fixing screws not provided.
- Glass/Door Specification:Â Suitable for 8mm, and 10mm thick glass (Glass Reduction Required).
- Material Specification:Â 304 grade Stainless Steel. Suitable for interior use.
- Finish(s): Brushed Satin
- Design Compatibility: Suitable for Partitions, Balustrade and General Frameless Glass Structures.
- Supplied with:
- 2 x Reinforced Screws
- 2 x End caps
- 2 x Gaskets
- 1 x Securing Pin
Assembly Instructions
The type of the screw needed will vary depending on the type of surface you’re fixing the glass clamp to (e.g. stainless steel post, wall, floor…). The Hexagon Socket Head Cap Screw (M8), shown below, is the standard screw to be used when fixing the glass clamps to steel posts. You may want to choose the correct fixing screw with similar dimension as this.
Below is a typical glass clamp application, displaying the recommended positions for fixing the glass clamps. However, some customers prefer fixing the clamps on top and bottom.
| Â Dimensions (mm) | Â Min. | Â Max. | |
| Â W | Â Width of Glass | Â 500 | Â 1200* |
| Â H | Â Height of Glass | Â 800 | Â 1000* |
| Â h1 | Â Distance between handrail and top of the glass | Â 10 | Â 50 without edge protection, 100 with edge protection |
| Â h2 | Â Distance between floor and bottom of the glass | Â 10 | Â 50 without edge protection, 100 with edge protection |
|  h3 |  Glass edge above – axle upper glass clamp |  100 |  150 |
|  h4 |  Glass edge below – axle lower glass clamp |  100 |  150 |
*Max. Size depends on glass type, thickness, and wind factor (when using outdoor).
** For safety reason, we suggest using the Secure Pin (supplied with your clamps) when the glass panel is fixed to the outside of a staircase and is overhanging.
Please note:Â All specifications are for reference purposes only and are subject to change without prior notice.
Additional information
| Thickness | 8mm, 10mm |
|---|
