-
Glass Balustrade Channel with Glassmove® Kit, End Caps, and Connection Pins
Glass Balustrade Fittings.
-
90° Corner For Glass Balustrade Channel
- Precision Engineering: Each corner is manufactured with the highest accuracy to ensure a perfect fit with your Glass Balustrade Channel.
- Aesthetic Consistency: Maintain the sleek, modern look of your balustrade system, irrespective of turns and angles.
- Durability: Built to last, these corners uphold the strength and integrity of your balustrade system.
- Ease of Installation: Designed for a hassle-free installation process, saving you time and effort.
-
Flat Back D Shaped Clamps for 6mm, 8mm, 10mm, and 12mm Glass
- Glass Specification: Suitable for 6mm, 8mm, 10mm, and 12mm glass (Glass Reduction Required).
- Material Specification: Zinc Alloy
- Finish(s): Chrome Plated, Satin Effect, Polished Brass, Matt Brass, Black, White
- Design Compatibility: Suitable for Partitions, Balustrade(opens in new tab) and General Frameless Glass Structures.
- Supplied with:
- 2 x Reinforced Screws
- 2 x Screw Cover Caps
- 2 x Gaskets
- 1 x Securing Pin
-
Flat Back Square Clamps for 6mm, 8mm, and 10mm Glass
- Glass Specification: Suitable for 6mm, 8mm, 10mm glass (Glass Reduction Required).
- Material Specification: Zinc Alloy
- Finish(s): Chrome Plated, Satin Effect, Polished Brass, Matt Brass, Black, White
- Design Compatibility: Suitable for Partitions, Balustrade(opens in new tab) and General Frameless Glass Structures.
- Supplied with:
- 2 x Reinforced Screws
- 2 x Screw Cover Caps
- 2 x Gaskets
- 1 x Securing Pin
-
Round Back Brushed Satin D Shaped Glass Clamp for 8mm and 10mm glass
D Shaped Glass Clamp Brushed Satin Stainless Steel, suitable for CURVED post/aperture interfacing. Clamps complete with gaskets and clamping fixings. M8 interface fixing cap screws to be provided by others (see technical drawing)
-
ROUND BACK Polished D Shaped Glass Clamps for 8mm and 10mm glass
Stainless steel polished D shaped glass clamps, suitable for curved post/aperture interfacing. Clamps come complete with washers, clamping fixings and optional security pins. M10 interface fixing cap screws to be provided by others (see technical drawing).
-
FLAT BACK Brushed/Satin D Shaped Glass Clamp for 8mm and 10mm glass
Flat Back Brushed Satin D Shaped Glass Clamp. Suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing cap screws to be provided by others (see technical drawing)
-
Flat Brushed Satin Square Glass Clamp for 8mm & 10mm Glass
Flat Brushed Satin Square Glass Clamp stainless steal, suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing screws to be provided by others (see technical drawing)
-
FLAT BACK Polished Square Glass Clamps for 8mm and 10mm glass
Stainless Steel Flat Back Polished Square Glass Clamps, suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing posi pan screws to be provided by others (see technical drawing)
-
ROUND BACK Polished Square Glass Clamps for 8mm and 10mm glass
Stainless Steel Round Back Polished Square Glass Clamps, suitable for CURVED post/aperture interfacing. Clamps complete with gaskets and clamping screws. M6 interface fixing posi pan screws to be provided by others (see technical drawing)
-
ROUND BACK Brushed Satin Square Shaped Glass clamps for 8mm and 10mm glass
ROUND BACK Brushed Satin Square Shaped Glass clamps. Suitable for CURVED post/aperture interfacing. Clamps complete with gaskets and clamping fixings. M6 interface fixing posi pan screws to be provided by others (see technical drawing)
-
Glass Balustrade End Post
- Material: 316 grade stainless steel in brushed satin finish
- Tube diameter: Ø42.4 or 48.3mm post
- Post Height:
- Ø42.4mm Posts = 978mm
- Ø48.3mm Posts = 972mm
- Glass compatibility: 8mm, 10mm, 12mm (Supplied with rubber gaskets for 8mm and 12mm glass)
- Suitable for indoor and outdoor use
Contents:
- 1 x stainless steel glass balustrade end post with 2 x 10mm glass clamps attached
- 1 x flange
- 1 x base cover
- 1 x saddle
- 2 x rubber gaskets for 8mm and 12mm glass
If you are not using a handrail, the saddle can be replaced with a flat end cap. End caps and handrails sold seperately.
Please Note: All descriptions, specifications, diagrams, illustrations and dimensions provider are approximations and intended for general guidance purposes only. They may be subject to change without prior notice. We make all reasonable efforts to ensure that the contents of this site are accurate and up-to-date, but can accept no responsibility for omissions, errors or subsequent changes.
Disclaimer: It is the responsibility of the customer to investigate if planning permissions are required, ensuring all projects are completed to British Standards BS 6399-1:1996 and BS 6180:2011 – Express Toughening Limited, trading as The Glass Warehouse, are not responsible for any building regulation requirements, this shall be up to the client to ensure safety precautions have been met accordingly.
-
180 Degree Middle Glass Balustrade Post
- Material: 316 grade stainless steel in brushed satin finish
- Tube diameter: Ø42.4 or 48.3mm post
- Post Height:
- Ø42.4mm Posts = 978mm
- Ø48.3mm Posts = 972mm
- Glass compatibility: 8mm, 10mm, 12mm (Supplied with rubber gaskets for 8mm and 12mm glass)
- Suitable for indoor and outdoor use
Contents:
- 1 x stainless steel middle glass balustrade post with 4 x 10mm glass clamps attached
- 1 x flange
- 1 x base cover
- 1 x saddle
- 4 x rubber gaskets for 8mm and 12mm glass
If you are not using a handrail, the saddle can be replaced with a flat end cap. End caps and handrails sold seperately.
Please Note: All descriptions, specifications, diagrams, illustrations and dimensions provider are approximations and intended for general guidance purposes only. They may be subject to change without prior notice. We make all reasonable efforts to ensure that the contents of this site are accurate and up-to-date, but can accept no responsibility for omissions, errors or subsequent changes.
Disclaimer: It is the responsibility of the customer to investigate if planning permissions are required, ensuring all projects are completed to British Standards BS 6399-1:1996 and BS 6180:2011 – Express Toughening Limited, trading as The Glass Warehouse, are not responsible for any building regulation requirements, this shall be up to the client to ensure safety precautions have been met accordingly.
-
90 Degree Corner Glass Balustrade Post
- Material: 316 grade stainless steel in brushed satin finish
- Tube diameter: Ø42.4 or 48.3mm post
- Post Height:
- Ø42.4mm Posts = 978mm
- Ø48.3mm Posts = 972mm
- Glass compatibility: 8mm, 10mm, 12mm (Supplied with rubber gaskets for 8mm and 12mm glass)
- Suitable for indoor and outdoor use
Contents:
- 1 x stainless steel middle glass balustrade post with 4 x 10mm glass clamps attached
- 1 x flange
- 1 x base cover
- 1 x saddle
- 4 x rubber gaskets for 8mm and 12mm glass
If you are not using a handrail, the saddle can be replaced with a flat end cap. End caps and handrails sold seperately.
Please Note: All descriptions, specifications, diagrams, illustrations and dimensions provider are approximations and intended for general guidance purposes only. They may be subject to change without prior notice. We make all reasonable efforts to ensure that the contents of this site are accurate and up-to-date, but can accept no responsibility for omissions, errors or subsequent changes.
Disclaimer: It is the responsibility of the customer to investigate if planning permissions are required, ensuring all projects are completed to British Standards BS 6399-1:1996 and BS 6180:2011 – Express Toughening Limited, trading as The Glass Warehouse, are not responsible for any building regulation requirements, this shall be up to the client to ensure safety precautions have been met accordingly.
-
6m Slotted Tube Handrail For Glass Balustrades
- Material: Grade 316 Stainless Steel
- Finish: Satin
- Length: 6 meters
- Diameter options: 42.4mm, 48.3mm
- Glass suitability: 10 – 21.52mm
- 6 meter rubber gaskets included. Available for:
- 10-12mm glass
- 13.52mm glass
- 15-17.52mm glass
- 19-21.52mm glass
- Glass not included
-
Brushed D Shaped Glass to Glass Clamp for 10-12mm glass
Brushed D Shaped Glass to Glass Clamp
Stainless steel brushed D shaped glass to glass balustrade clamp. Complete with washers, can also be used with 12mm glass if needed.
Balustrade Fittings
Balustrade Fittings Results
When it comes to installing glass balustrades, do you prefer the slimline look of stainless steel glass clamps over baluster posts? At Express Toughening, we have a variety of glass balustrade fixings for you to choose from, with a range of finishes and thicknesses.
Whether they’re for outdoor or indoor use, you’re bound to find the right style and size fittings for your balustrades from our glass clamps and channels below.
Stylish Glass Balustrade Clamps
Using metal clamps is a popular method of securing glass balustrades because of their minimal yet modern and stylish appearance, allowing the sleek glass panels to be the stars of the show. However, it’s important to ensure you select the correct type for your chosen glass thickness.
Some of our glass clamps are suitable for panels that are 8mm–10mm thick, while others will only fit a glass panel that is 10mm–12mm thick.
Additionally, some pieces come with all the necessary parts to complete the fitting, while others may require you to supply your own screws. Depending on the product and parts, the glass panels may also need to be prepared with pre-drilled holes for the fixings.
Remember to always check the product description and technical data to make sure the glass fixings meet your needs before placing an order!
Stainless Steel Balustrade Fixings
As you’ll discover when browsing our collection, most of our glass balustrade clamps are made from stainless steel (either 304 or 316 grade) – though we do also offer aluminium alloy channels for thicker glass panels up to 21.5mm.
You’ll have a choice between a polished finish that gives your fittings a glossy shine, or a brushed satin finish that creates a softer and more subtle look.
There’s also the option of stockier square glass clamps for a distinctive style, or D-shaped glass clamps with an elegant rounded edge for a better flow.
Don’t forget to select the right back for the interface, too – as flat back glass clamps are only suitable for flat posts and apertures, while round back glass clamps will only fit with curved posts and apertures. If you’re joining two panels directly, you’ll need glass-to-glass clamps.
Or, if you’re venturing into the minimalist world of stand-off or offset mounting hardware, which look like small metal buttons and are typically fascia-fixed, you should read through the technical specs for our circular stand-off and offset glass balustrade fixings.
These products are also compatible with designs such as glass partitions and frameless glass structures, and can be used both indoors and outdoors.
Discover Glass Balustrade Fittings
We have much more available here at Express Toughening, so if you don’t see what you need on this page, explore our website to discover more balustrade systems and mounting options, including posts and glazing channels.
If you would prefer hardware in an RAL colour rather than a metal finish, you can find matt black options in our selection of glass fittings and accessories.
If you need more information about any of our glass balustrade fittings and accessories, you can always ask the Express Toughening team – call us on 020 8500 1188 or send an email to info@expresstoughening.com and we’ll be happy to help!