Express 24/48 hour service available now!

Home / Shop / Commercial Mirrors

Commercial Mirrors

Product Description

Here at Express Toughening, mirrors are currently available in four different finishes: Silver, Grey, Bronze and Bronze Antique. Our custom mirrors can be purchased in two thicknesses, 4mm and 6mm. Designed to fit seamlessly within any room, offering a luxury look and feel. They can also be shaped, cut and polished to your individual requirements.

Foil and clear backing are offered as standard. Foil backing is recommended for rooms that may contain moisture such as bathrooms and kitchens, this type of backing will not only provide safety in the event of breakage, but will also help prevent condensation. Our clear safety backing will help reduce injury in the event of breakage by holding the larger pieces of glass together.

£38.50£159.50

  • Express Delivery available on this product.
  • This product is manufactured in the UK.
  • Polished edges included.
  • Safety backing included.
  • Mirror is not a toughened product.

Please Select The Colour Below

Antique Bronze Mirror - Commercial
Bronze Mirror - Commercial
Grey Mirror – Commercial
Silver Mirror – Commercial

Or enter a colour of your choice

Not sure about your colour code?

You can find relevant colour codes for different providers using the links below:

Dulux Pantone Ral Crown Farrow Ball Laura Ashley

Please Select The Shape Below

Circle
Ellipse
Parallelogram
Rectangle
Triangle
Semicircle
Semiellipse
Quadrant
Left Hand Rake
Right Hand Rake
Double Rake Irregular
Cut Off Corner Rectangle (Right)
Cut Off Corner Rectangle (Left)
Left Hand "L" Shape
Reverse "T" shape
Right Hand "L" Shape

Please fill in the dimensions below

(please note to allow a 2mm tolerance in all designs)

Rectangle

  • Min: 250Max: 3000

  • Min: 100Max: 2000

Left Hand Rake

  • Left Hand Rake

    Min: 100Max: 1500

  • Min: 250Max: 3000

  • Min: 10Max: 1499

Right Hand Rake

  • Right Hand Rake

    Min: 10Max: 1499

  • Min: 250Max: 3000

  • Min: 100Max: 1500

Double Rake Irregular

  • Min: 250Max: 3000

  • Min: 100Max: 1465

  • Min: 10Max: 1499

  • Min: 10Max: 2999

Reverse

  • Min: 250Max: 3000

  • Min: 10Max: 2000

  • Min: 100Max: 1999

  • Min: 10Max: 2999

  • Min: 10Max: 2999

Left Hand L Shape

  • Left Hand L Shape

    Min: 250Max: 3000

  • Min: 10Max: 2999

  • Min: 100Max: 2000

  • Min: 10Max: 1999

Right Hand L Shape

  • Min: 250Max: 3000

  • Min: 10Max: 2999

  • Min: 100Max: 2000

  • Min: 10Max: 1999

Cut Off Corner Rectangle (Left)

  • Cut Off Corner Rectangle (Left)

    Min: 100Max: 3000

  • Min: 250Max: 2999

  • Min: 10Max: 2999

  • Min: 10Max: 2999

Cut Off Corner Rectangle (Right)

  • Cut Off Corner Rectangle (Right)

    Min: 100Max: 3000

  • Min: 250Max: 2999

  • Min: 10Max: 2999

  • Min: 10Max: 2999

Circle

  • Circle

    Min: 330Max: 1500

Ellipse

  • Ellipse

    Min: 330Max: 3000

  • Min: 330Max: 1500

Quadrant

  • Min: 250Max: 3000

Parallelogram

  • paralleogram

    Min: 100Max: 3000

  • Min: 250Max: 3000

  • Max: 90

Semicircle

  • Min: 250Max: 3000

Semiellipse

  • Min: 360Max: 1500

  • Min: 360Max: 3000

Triangle

  • Triangle Shape - A (length), B (Height)

    Min: 250Max: 3000

  • Min: 100Max: 3000

Please select product extras if required

  • Cut Outs

    Cut outs should not be smaller than the thickness of the glass, or closer to the edge than 2.5 times the thickness of the glass, or larger than 30% of overall glass size. A customer service representative will contact you regarding your exact requirements if needed. Please upload any drawings if possible. Please upload any drawings below if possible.

  • Notches

    Any polished notch will have an internal radius of at least 14mm. Non polished notches will be approximately 7mm internal radius. A customer service representative will contact you regarding your exact requirements if needed. Please upload any drawings below if possible.

  • Drill Holes

    Any drilled holes must be the same size or greater than the thickness of your glass selected. (For example 10mm glass can only have a hole of 10mm in diameter or greater). Drilled holes must be within reasonable distance from edge of the glass or other holes / cut-outs to prevent breaking when toughened. A customer service representative will contact you regarding your exact requirements if needed. Please upload any drawings below if possible.

  • Radius Corners

    A customer service representative will contact you regarding your exact requirements if needed. Please upload any drawings below if possible.

  • Dubbed Corners

    A customer service representative will contact you regarding your exact requirements if needed.

  • Please share all diagrams, drawings and specifications (maximum of 10 files allowed)Max file size: 8 MBPermitted file types: jpg jpeg jpe png gif pdf

  • Polymer coating protects glass with a barrier that repels water, soil, stains, soap scum, rust and hard water mineral deposits.

Product total

Extras total

Grand total

Please Select The Thickness Below

Please Select The Mirror Backing Below

For express 24/48 hour delivery, call 020-8500-1188

Your Order Subtotal:

£38.50£159.50

Call Now
Get Connected with us through our Social Media Channels!