-
White 2,400mm Glazing Channels – 8mm – 10mm Glass
£44.99Buy Now- Dimensions: 14.3mm wide x 19.05mm height x 2,410mm long – (PLEASE ENQUIRE IF YOU NEED A LONGER LENGTH)
- Glass compatibility: Suitable for 8mm – 10mm glass. (No Glass Preparation Required)
- Material: Extruded Aluminium.
- Finish: White.
- Fitting type: Silicone fit.
- Suitable for Indoor and Outdoor Use.
- Suitable for Shower Enclosures, Wet Rooms, Bath Screens and General Glazing Restraint.
Can be used in conjunction with a clip in cover to create a continuous threshold from a fixed panel or continue a line to separate wall finishes without visible fixings.
Please note that these require cutting and drilling to suit on site.
-
Glass Balustrade Channel with Glassmove® Kit, End Caps, and Connection Pins
£449.99 – £499.99Buy Now This product has multiple variants. The options may be chosen on the product pageGlass Balustrade Fittings.
-
Flat Back D Shaped Clamps for 6mm, 8mm, 10mm, and 12mm Glass
£10.00Buy Now This product has multiple variants. The options may be chosen on the product page- Glass Specification: Suitable for 6mm, 8mm, 10mm, and 12mm glass (Glass Reduction Required).
- Material Specification: Zinc Alloy
- Finish(s): Chrome Plated, Satin Effect, Polished Brass, Matt Brass, Black, White
- Design Compatibility: Suitable for Partitions, Balustrade(opens in new tab) and General Frameless Glass Structures.
- Supplied with:
- 2 x Reinforced Screws
- 2 x Screw Cover Caps
- 2 x Gaskets
- 1 x Securing Pin
-
Flat Back Square Clamps for 6mm, 8mm, and 10mm Glass
£13.19Buy Now This product has multiple variants. The options may be chosen on the product page- Glass Specification: Suitable for 6mm, 8mm, 10mm glass (Glass Reduction Required).
- Material Specification: Zinc Alloy
- Finish(s): Chrome Plated, Satin Effect, Polished Brass, Matt Brass, Black, White
- Design Compatibility: Suitable for Partitions, Balustrade(opens in new tab) and General Frameless Glass Structures.
- Supplied with:
- 2 x Reinforced Screws
- 2 x Screw Cover Caps
- 2 x Gaskets
- 1 x Securing Pin
-
Round Back Brushed Satin D Shaped Glass Clamp for 8mm and 10mm glass
£27.59Buy NowD Shaped Glass Clamp Brushed Satin Stainless Steel, suitable for CURVED post/aperture interfacing. Clamps complete with gaskets and clamping fixings. M8 interface fixing cap screws to be provided by others (see technical drawing)
-
ROUND BACK Polished D Shaped Glass Clamps for 8mm and 10mm glass
£31.49Buy NowStainless steel polished D shaped glass clamps, suitable for curved post/aperture interfacing. Clamps come complete with washers, clamping fixings and optional security pins. M10 interface fixing cap screws to be provided by others (see technical drawing).
-
FLAT BACK Brushed/Satin D Shaped Glass Clamp for 8mm and 10mm glass
£27.59Buy NowFlat Back Brushed Satin D Shaped Glass Clamp. Suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing cap screws to be provided by others (see technical drawing)
-
Flat Brushed Satin Square Glass Clamp for 8mm & 10mm Glass
£10.00Buy Now This product has multiple variants. The options may be chosen on the product pageFlat Brushed Satin Square Glass Clamp stainless steal, suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing screws to be provided by others (see technical drawing)
-
FLAT BACK Polished Square Glass Clamps for 8mm and 10mm glass
£35.99Buy NowStainless Steel Flat Back Polished Square Glass Clamps, suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing posi pan screws to be provided by others (see technical drawing)
-
ROUND BACK Polished Square Glass Clamps for 8mm and 10mm glass
£35.99Buy NowStainless Steel Round Back Polished Square Glass Clamps, suitable for CURVED post/aperture interfacing. Clamps complete with gaskets and clamping screws. M6 interface fixing posi pan screws to be provided by others (see technical drawing)
-
ROUND BACK Brushed Satin Square Shaped Glass clamps for 8mm and 10mm glass
£35.99Buy NowROUND BACK Brushed Satin Square Shaped Glass clamps. Suitable for CURVED post/aperture interfacing. Clamps complete with gaskets and clamping fixings. M6 interface fixing posi pan screws to be provided by others (see technical drawing)
-
Glass Balustrade End Post
£129.99 – £139.99Buy Now This product has multiple variants. The options may be chosen on the product page- Material: 316 grade stainless steel in brushed satin finish
- Tube diameter: Ø42.4 or 48.3mm post
- Post Height:
- Ø42.4mm Posts = 978mm
- Ø48.3mm Posts = 972mm
- Glass compatibility: 8mm, 10mm, 12mm (Supplied with rubber gaskets for 8mm and 12mm glass)
- Suitable for indoor and outdoor use
Contents:
- 1 x stainless steel glass balustrade end post with 2 x 10mm glass clamps attached
- 1 x flange
- 1 x base cover
- 1 x saddle
- 2 x rubber gaskets for 8mm and 12mm glass
If you are not using a handrail, the saddle can be replaced with a flat end cap. End caps and handrails sold seperately.
Please Note: All descriptions, specifications, diagrams, illustrations and dimensions provider are approximations and intended for general guidance purposes only. They may be subject to change without prior notice. We make all reasonable efforts to ensure that the contents of this site are accurate and up-to-date, but can accept no responsibility for omissions, errors or subsequent changes.
Disclaimer: It is the responsibility of the customer to investigate if planning permissions are required, ensuring all projects are completed to British Standards BS 6399-1:1996 and BS 6180:2011 – Express Toughening Limited, trading as The Glass Warehouse, are not responsible for any building regulation requirements, this shall be up to the client to ensure safety precautions have been met accordingly.
-
180 Degree Middle Glass Balustrade Post
£144.99 – £154.99Buy Now This product has multiple variants. The options may be chosen on the product page- Material: 316 grade stainless steel in brushed satin finish
- Tube diameter: Ø42.4 or 48.3mm post
- Post Height:
- Ø42.4mm Posts = 978mm
- Ø48.3mm Posts = 972mm
- Glass compatibility: 8mm, 10mm, 12mm (Supplied with rubber gaskets for 8mm and 12mm glass)
- Suitable for indoor and outdoor use
Contents:
- 1 x stainless steel middle glass balustrade post with 4 x 10mm glass clamps attached
- 1 x flange
- 1 x base cover
- 1 x saddle
- 4 x rubber gaskets for 8mm and 12mm glass
If you are not using a handrail, the saddle can be replaced with a flat end cap. End caps and handrails sold seperately.
Please Note: All descriptions, specifications, diagrams, illustrations and dimensions provider are approximations and intended for general guidance purposes only. They may be subject to change without prior notice. We make all reasonable efforts to ensure that the contents of this site are accurate and up-to-date, but can accept no responsibility for omissions, errors or subsequent changes.
Disclaimer: It is the responsibility of the customer to investigate if planning permissions are required, ensuring all projects are completed to British Standards BS 6399-1:1996 and BS 6180:2011 – Express Toughening Limited, trading as The Glass Warehouse, are not responsible for any building regulation requirements, this shall be up to the client to ensure safety precautions have been met accordingly.
-
90 Degree Corner Glass Balustrade Post
£154.99Buy Now This product has multiple variants. The options may be chosen on the product page- Material: 316 grade stainless steel in brushed satin finish
- Tube diameter: Ø42.4 or 48.3mm post
- Post Height:
- Ø42.4mm Posts = 978mm
- Ø48.3mm Posts = 972mm
- Glass compatibility: 8mm, 10mm, 12mm (Supplied with rubber gaskets for 8mm and 12mm glass)
- Suitable for indoor and outdoor use
Contents:
- 1 x stainless steel middle glass balustrade post with 4 x 10mm glass clamps attached
- 1 x flange
- 1 x base cover
- 1 x saddle
- 4 x rubber gaskets for 8mm and 12mm glass
If you are not using a handrail, the saddle can be replaced with a flat end cap. End caps and handrails sold seperately.
Please Note: All descriptions, specifications, diagrams, illustrations and dimensions provider are approximations and intended for general guidance purposes only. They may be subject to change without prior notice. We make all reasonable efforts to ensure that the contents of this site are accurate and up-to-date, but can accept no responsibility for omissions, errors or subsequent changes.
Disclaimer: It is the responsibility of the customer to investigate if planning permissions are required, ensuring all projects are completed to British Standards BS 6399-1:1996 and BS 6180:2011 – Express Toughening Limited, trading as The Glass Warehouse, are not responsible for any building regulation requirements, this shall be up to the client to ensure safety precautions have been met accordingly.
-
Smooth AR Top Mount Balustrade 90 Degree Post (10 – 10.8mm Glass)
£102.00Buy NowSmooth AR Top Mount Balustrade 90 Degree Post
The Smooth AR top mount balustrade 90 degree post is an innovative railing system designed to be fully modular. The posts are fully assembled – includes post caps, packers, rubbers, handrail screws and cover plate. Suitable for both indoor and outdoor installations, tested to BS 6180:2011 standards.
Product brochure can be downloaded here.
-
Smooth AR Top Mount Balustrade End Post (10 – 10.8mm Glass)
£110.40Buy NowSmooth AR Top Mount Balustrade End Post
The Smooth AR top mount balustrade end post is an innovative railing system designed to be fully modular. The posts are fully assembled – includes post caps, packers, rubbers, handrail screws and cover plate. Suitable for both indoor and outdoor installations, tested to BS 6180:2011 standards.
Product brochure can be downloaded here.
