-
Polished Finish Vertical Support Bar
£46.20Buy NowAdjustable vertical support bar. Screws provided as standard, however alternative fixings may be required subject to structural and application requirements. Suitable for distances from 140mm-300mm between glass edge and fixing surface.
-
Adjustable Faceting Corner Glass To Wall Support Bar
£47.20Buy Now90 Degree glass to wall corner support bar, including a sleeved wall bracket (concealed fixing). Product includes Glazing Washers and Allen Keys.
-
2400mm Tall Aluminium Channels
£38.40 Buy Now -
1,240mm Electro Polished Aluminium Glazing Channels up to 12mm Glass
£14.40Buy NowPlease note that these required cutting and drilling to suit on site.
-
Double Sided Pull Handle 19mm x 400mm
£39.72Buy NowPull Handle complete with threaded inserts and grub screws. Pull Handle supplied with all necessary glazing washers and fixings.
-
FLAT BACK Polished Square Glass Clamps for 8mm and 10mm glass
£22.02Buy NowStainless Steel Flat Back Polished Square Glass Clamps, suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing posi pan screws to be provided by others (see technical drawing)
-
FLAT BACK Brushed/Satin D Shaped Glass Clamp for 8mm and 10mm glass
£16.55Buy NowFlat Back Brushed Satin D Shaped Glass Clamp. Suitable for FLAT post/aperture interfacing. Clamps complete with gaskets and clamping screws. M8 interface fixing cap screws to be provided by others (see technical drawing)
-
FlexFit Glass Combi Tool
£114.00Buy NowThe Flexfit glass combi tool helps push the wedge into place securely in those hard to reach areas and smoothly roll out gap fillers into the profile if needed.
-
Polished Chrome Adjustable Glass to Glass Hinge
£61.56Buy NowGlass to glass hinge, 90 Degree opening in both directions with automatic closing when open less than 25 degrees.
-
Brushed Finish Glass to Glass Free Pivot Hinge Concealed Fixings
£45.60Buy NowGlass to glass fold back hinge with cover plates to hide all fixings. Product includes necessary hardware and gaskets.
-
2,400mm Translucent Glass to Wall Seals for 8mm Glass
£10.26Buy Now2.4m length of glass to wall movement seal for frameless doors. Sold in single units and to be utilised for interfaces between the bottom edge of the door glass and the associated wall detail.
-
2,400mm Translucent Glass to Glass Magnetic Seals for 8mm Glass
£22.57Buy Now2.4m length of glass to glass magnetic seals for frameless doors. old in single units and to be utilised for interfaces between the leading edge of the door glass and the adjacent fixed glass pane. Rigid fin restricts opening to one direction only.
-
Satin Stainless Steel Finger Pull
£19.80Buy NowFlush fit door finger pull. Product includes the necessary Glazing Washers.
-
Guardsman Pull Handle Stainless Steel 450mm
£58.82Buy NowStainless Steel Back to Back Guardsman Pull Handle. Complete with threaded inserts and grub screws. Pull Handle supplied with all necessary glazing washers and fixings. Overall height of each arm is 600mm.
-
Double Sided Pull Handle 19mm x 154mm
£21.89Buy NowSupplied with all necessary glazing washers and fixings
-
Cylinder Door Knob with Perimeter Indentations
£10.26Buy NowProduct includes the necessary glazing washers.
