-
FlexFit Wedge Kit 1.0kN for 2500mm Glass Length
The Flexfit wedge kit system allows the installer to adjust the position of each glass panel accurately, ideal for the secure alignment of glass balustrades. By using this tool you can reduce assembly time by up to 30%. The wedge provided will also prevent any movement once installed, giving the end user complete peace of mind.
-
Glass to Glass 90 Degree Corner Hinge
90 degree corner Glass to Glass Door Hinge. 90 Degree Opening in Both Directions, with Automatic Closing when open less than 25 degrees. Product Includes necessary Allen Keys and Glazing Washers.
-
2,400mm Translucent Glass Seals for 8mm Glass
2.4m length of glass to wall/floor seal for frameless doors. Sold in single units and to be utilised for interfaces between the bottom/vertical edge of the door glass and the associated surface.
-
Polished Chrome Door Knob With Buffer
Cylinder door knob with rubber buffer. For applications where over-opening the door will cause the knob to strike something (such as a wall, sink etc.) the rubber buffer helps to protect both the knob and the surface being contacted by the knob. Product includes the necessary glazing gaskets.
-
Cylinder Door Knob with Biased Indentation
Product includes necessary Glazing Washers and Allen Key
-
Offset Circular Glass Balustrade Fitting
Supplied with necessary gaskets and 125mm length of zinc plated steel stud. (See technical drawing for more information.)
-
Chrome Plated Glass to Wall 90° Degree Door Hinge
Wall Mounted, Glass Door Hinge. 90 Degree Opening in Both Directions, with Automatic Closing when open less than 25 degrees. Product Includes necessary Allen Keys and Glazing Washers. Fixing Screws provided as standard, however alternative fixings may be required subject to application and structural requirements.
-
FlexFit Glass Adjustment Tool
The Flexfit Glass Adjustment tool helps to navigate and align your balustrade accurately.
-
Glass Balustrade Profile TL-6020 (140 x 60 x 2500)
The TL-6020 is a top mounted profile best suited for 0.74kN to 1.5kN, therefore ideal for external residential or commercial projects. Tested by the British Standards Institute to BS 6180:2011 with Kitemarkâ„¢ Certificate.
Product brochure can be downloaded here.
-
2,200mm Translucent Glass to Glass Closure Seals for 8mm Glass
2.2m length of glass to glass closure seal for frameless doors. Sold in single units and to be utilised for interfaces between the leading edge of the door glass and the adjacent fixed glass pane. Rigid fin restricts opening to one direction only.
-
Glass to Glass 180 Degree Inline Fitting
180 degree glass to glass inline fitting, product includes necessary gaskets and fixings.
-
Brushed Glass to Glass 90 degree Corner Fitting Concealed Fixings
90 degree glass to glass corner fitting, with concealed fixings product includes necessary gaskets and fixings.
-
Matt Black Glass to Wall 90 Degree Door Hinge
Matt Black Glass to Wall 90 Degree Door Hinge. Supplied with Translucent Rubber Glazing Washers, and Hex Socket Head CSK Setscrews.
(Customer to provide wall fixings to suit application and structural requirements).
-
Glass Balustrade Extension Pin (Pack of 8)
Create a seamless connection between profiles by using this extension pin, simply tap into place. You can download the technical diagram here for reference.
-
Glass to Glass Free Pivot Hinge Concealed Fixings
Glass to Glass Fold Back Hinge with cover plates to hide all fixings. Product includes necessary Hardware and Glazing Gaskets
-
Chrome Glass to Wall 90 degree Hinge
Wall Mounted, Glass Door Hinge. 90 Degree Opening in Both Directions, with Automatic Closing when open less than 25 degrees. Product Includes necessary Allen Keys and Glazing Washers. Fixing Screws provided as standard, however alternative fixings may be required subject to application and structural requirements.
Need help? Give us a call on 020 8500 1188
Fittings and Accessories

Home / Fittings and Accessories / Page 3